In explosion-proof environments, consider the zone classification, gas group, and temperature class; the certification scope of the motor and junction box must fully cover site conditions.
In explosion-proof environments, consider the zone classification, gas group, and temperature class; the certification scope of the motor and junction box must fully cover site conditions.
Selecting a pump for explosion‑proof environments involves more than simply fitting it with an explosion‑proof motor. The zone classification, gas group, temperature class, and overall wiring configuration must be properly matched; otherwise, the certification scope will not cover the actual site conditions.
First confirm whether the installation location belongs to Zone 0, Zone 1, or Zone 2, then identify the gas or dust group present (IIA, IIB, IIC) and its ignition temperature. While the pump body itself typically does not generate sparks, the motor, junction box, sensors, and trace heating components all fall within the scope of explosion‑proof assessment.
The Ex marking, gas group, and temperature class on the motor nameplate must fully encompass the site conditions.
The junction box and cable entry devices must match the motor’s protection rating; avoid using standard gland entries.
When using variable frequency drives, verify the motor’s temperature rise at low frequencies and install an independent fan if necessary.
Accessories such as flow meters and pressure sensors also require explosion‑proof certification or intrinsically safe circuit approval.
The control cabinet should be located in a non‑explosion‑proof area or use a positive‑pressure or flameproof enclosure. Use shielded cables for field wiring and ensure proper equipotential bonding. Strictly follow lockout/tagout procedures during maintenance. Before placing an order, provide the manufacturer with zone diagrams and gas parameters so that engineers can issue a selection confirmation form, preventing rework due to certification discrepancies after delivery.