There are directional requirements, and installation must follow the arrow on the housing; do not arbitrarily flip it horizontally or vertically.
Inside a gear flow meter are two meshing gears. Once the flow direction is determined, the force direction on the gears, the bearing load surfaces, and the compensation direction for end-face clearance are all designed accordingly. Installing it in the reverse direction changes the force paths and internal leakage routes, resulting in under‑reading, insensitivity at low flow rates, and increased wear on the end faces and bushings during prolonged operation.
For pulse output models, ensure proper shielding and grounding; use twisted‑pair shielded cable for long‑distance transmission. For 4–20 mA models, verify power supply and load resistance. During initial startup, first pass gas or liquid at low speed to bleed air, confirm no abnormal noise, then increase to operating flow.